Compound Miter Saw Alignment Gauges
MasterGage tools help woodworkers verify compound miter saw references for square cuts miter settings bevel settings and repeatable angle work. Measured setup checks reduce reliance on factory detents or visual estimates alone.
Machine Set Up
Compound miter saw accuracy depends on more than the printed scale or detent. Check the zero position blade-to-fence relationship miter reference bevel reference and work support before relying on an angle setting. MasterGage tools provide measured references for those checks; always follow the saw manufacturer’s adjustment and safety procedures.
Machine Maintenence
• Check blade-to-fence squareness at zero
• Verify miter and bevel settings against a known reference
• Transfer and confirm workpiece angles
• Support repeatable trim and joinery cuts
• Diagnose angle-cut errors before changing stops
• Verify miter and bevel settings against a known reference
• Transfer and confirm workpiece angles
• Support repeatable trim and joinery cuts
• Diagnose angle-cut errors before changing stops
The following MasterGage precision alignment tools are designed for use with a Compound Miter Saw
MasterGage® Professional Package
The MasterGage Professional is a broad woodworking-machine alignment, calibration, setup, and troubleshooting system. It combines a precision dial indicator, height scales, protractor capability, and accessories for measured setup across compatible machines.
MasterGage® Classic Package
The MasterGage Classic is a versatile non-angular woodworking-machine alignment and setup system. Use its precision-ground body, dial indicator, scales, and accessories to check heights, squareness, parallelism, and applicable machine relationships.
Universal Angle Guide & Height Gauge
Transfer and read woodworking angles, set saw blade or router-bit height, and work from a clear physical reference with the Universal Angle Guide & Height Gauge. It reads 0 to 180 degrees in 1/2-degree increments and includes fractional and metric height gauges.
MasterPlate
Use the MasterPlate as a broad, precision-ground reference surface for aligning compatible table saws and other saws. Its 6 x 10 inch aluminum plate provides more usable measuring surface than a toothed saw blade when checking miter-slot parallelism, blade squareness, miter settings, and bevel settings.
